Product Manual


© Adam Equipment Company 2019
6.0 OPERATION
NOTE: BCT scales only
SETTING THE WEIGHING UNIT, lb or kg
The BCT scale will turn on displaying the last weighing unit selected, either kilograms or
pounds. To change the weighing unit press the [Units] key when the “Unit Weight”
display shows zero. If necessary press the [CE] key to clear the unit weight before
changing.
6.1 ZEROING THE DISPLAY
Press the Zero key to re-zero the display with no load on the weigh pan. If the balance was
damaged or the weight is bigger than the range of the zero, this function will be inactive. It
may be necessary to re-zero the scale over a period of time to account for minor drifting.
6.2 TARING
 Zero the scale by pressing the [Zero/0] key if necessary. The indicator
“0” will be ON.
 Place a container on the platform and its weight will be displayed.
 Press [Tare] to tare the scale. Once the scale stabilises, it will display the net
weight and the NET sign will be displayed.
 As a product is added, only the weight of the product will be shown. The
scale could be tared a second time if another type of product was to be
added to the first one. Again only the weight that is added after taring will be
displayed.
 When the container is removed a negative value will be shown. If the scale
was tared just before removing the container, this value is the gross weight of
the container plus all products those were removed. The indicator “0”
will also be ON because the platform is back to the same condition as it was
when the [Zero/ 0] key was pressed last.
TARE WEIGHT IS KNOWN (PRE-TARE)

When the pan is empty, press [Tare] key, the display will show “P- TARE”. Input the
weight of the container, press [Tare] key, Pre-tare complete. User can set follow function
ON or OFF in F5 PTE:
In weighing mode, when tare weight is known, input tare weight, then press [Tare] key to
Pre-tare.