Product Manual


© Adam Equipment Company 2019
T6 Chk Turn XOR check on or off.

T7 FC2 Communication mode: 1-6
T8 PF2 Print functions 1-9
P2 FUN – Other function settings
Parameter Definition Options
F1 BL For setting the backlight
ON
OFF
Auto
F1C SL
Setting the sleep time of the backlight in
seconds.
1-45 seconds
F2 ARG
For setting the average unit weight function
automatically.
ON
OFF
F3 CST Tare and zero stable waiting time.
ON
OFF
F4 MAE
Turn ON/OFF next add up when not returning to
zero after the previous add up.
ON
OFF
F5 PTE
Set pre-taring ON/OFF when pre-inputting the
tare value.
ON
OFF
F6 UNT Selecting the Weighing Unit Kg, lb, oz, g
F7 FIL Filter speed settings
ON
OFF
F8 ZPE To set if the scale can alarm when weight is 0.
ON
OFF
F9 FAL
On means full alarm mode.
OFF means simple alarm mode.
ON
OFF
F10 BC To set if the Hi-Lo relay runs after stable.
ON
OFF
Press ‘’ID’’ to escape and return to normal weighing mode.
7.2 SYSTEM PARAMETERS
To access system parameters, turn the indicator off, then press and hold down the
CE/Backlight & PLU buttons, and turn on the indicator using the on/off rocker switch. The
indicator will display CA:C3:-3 ------ Using the keypad key in 123456 & then press the
PRINT key, repeated pressing of the PRINT key will cycle through the available options
listed below: