Product Manual


© Adam Equipment Company 2019 10

To change the weighing unit, press the [Units] key. The various weighing unit options can
be enabled by the user in the parameters section. See section 10.
6.4 PARTS COUNTING
The indicator can be used to count parts based on the average weight of a sample
weighed. When more parts are added the total number of parts are displayed.
 If a container is to be used, place this container on the platform before entering
parts counting and press [Tare].
 Ensure Parts Counting is enabled in the parameters section. See section 10.
 To enter the Parts Counting mode, when in normal weighing mode press [Units]
until ‘PCS’ is displayed. Check if the reading is “0”, if not, press [Zero] and the zero
symbol will be displayed.
 Put the desired sample on the weighing platform in order to determine its average
weight. Once stable, press [Mode/Print], “N – XXX” will be displayed which stands
for the sample quantity. For example, if 20 parts are placed on the platform then 20
would needed to be entered as the sample quantity. This is needed in order to
determine the average piece weight.
 Press [Units] to shift the flashing digit and use [Tare] to increase and [Zero] to
decrease the value as necessary.
 Press [MR] to weigh the samples and determine an average piece weight.