Product Manual



Mass on the platform is above the high limit

Mass is between the limits

Mass is below the low limit

6.5.1 Setting up check weighing parameters

 In normal weighing mode, hold down [Mode/Print] to enter the check weighing

function.

 The limits are displayed in the weighing unit in use.

 The display will show “– H – L -”. The hyphens represent the audible alarm whilst

the “H” represents the high limit and the “L” represents the low limit. The alarm can

also be set to OFF.

 When the displayed hyphens flash, this is an indication that the beep is ON.

There are 6 various customisable alarm options:

- H L

The beep is on when the weighing mass is more than the set high limit.

H - L

The beep is on when the weighing mass is between the set high and low limit.

H L -

The beep is on when the weighing mass is below the set low limit.

- H L -

The beep is on when the weighing mass is both more than and below the set

limits.

- H - L

The beep is on when the weighing mass is in between the set limits and more

than the set high limit.

H - L -

The beep is on when the weighing mass is in between the set limits and below the

set low limit.