Product Manual



NOTE: if there is no reference weight on the platform and percent weighing function is

entered, this function will not work and the indicator will return back to PCS and to normal

weighing mode.

 Remove the sample weight. When another item with a different weight value is put

on the pan, the relative % value will be shown against the initial reference sample

value. For example, if 3500g is placed on the platform and percent weighing is

selected, the display will show 100.00%. Remove the 3500g weight and place a

3000g weight. The display will show 86% as 3000g is 85.7% of 3500g.

NOTE: decimal points will be rounded up or down depending on the place value when

weighing against the reference weight.

 Press [Units] to return to normal weighing.

6.7 ANIMAL (DYNAMIC) WEIGHING

The indicator can be set to animal (dynamic) weighing for weighing any items that are

unstable or may move. Ensure this function is turned on; See section 10.3.

The indicator uses a special filter to minimise the effects of any movement on the platform.

 Hold down [M+] for 3 seconds. The first option is “P1 UNT”, press the [MR] key 2

more times to display “P3 FUN”.

 Press the [Mode/Print] key. “OFF PWR” will be displayed. Press the [Mode/Print]

key to advance to the third function, “XXd - Hd”, Animal weighing.