Product Manual



 When using the manual unlocking option within animal weighing, press

[Zero] to manually unlock the held weight.

 To select the peak hold function within animal weighing, use the same method as

above until “PEK” is displayed. Press [MR] twice and then press [Zero] to return to

normal weighing. The peak hold function allows the peak weight to be held and

displayed even after the load has been removed.

 To weigh a second animal press the [Tare] key if necessary to zero the display, and

place the next animal on the platform. It is also possible to simply place the next

animal on the scale without clearing the last value first. The indicator will detect the

new weight and hold it as before.

 The indicator will remain in animal weighing mode until the function is turned off.

See section 10.3.

6.8 ACCUMULATED TOTAL

The indicator can be set to accumulate when a weight is added to the platform.

NOTE:

1. The accumulation function is available only during weighing. It is disabled during

parts counting or percent weighing.

2. The accumulated weights will be stored in depending upon the weighing unit in use.

3. If at any time the weighing units are changed, the accumulated data will be lost.

6.8.1 Accumulation procedure

 In normal weighing mode, add the sample to the platform and press [M+] to save

the present weight. The display will show “ADD XX” (XX stands for the records

serial number).