Product Manual


© Adam Equipment Company 2019 22
9.1.2 Operation method
(1) Connect the indicator to the PC using the RS 232 cable provided, this is so the
customised label can be downloaded straight to the indicator after completion.
(2) Start up the label editing software.
(3) Press the barcode icon in the top left-hand corner, the following menu will be
displayed:
(4) Set the parameters
From here select to start a new label
design, open a previously saved
template or save a template to your
PC.
Printer:Chosethetypeofprintingmethod(Default:builtinprinter)

Width:Lengthoflabel(unitisdot,8dot=1mm,400dot=50mm)

Height:400dot=50mm

Printspeed:Thedefaultvalueis4

Direction:Printdirection,0ispositive,1isnegative

Prints:Howmanylabelswillbeprintedwhentheprintbuttonispressed

Formadd:Fortheaccumulativefunction,willprintwhenaddingup.