Product Manual



9.2 LABEL DOWNLOAD PROCEDURE VIA RS 232 CABLE

 Save your final label design in preparation for download via RS 232 to the indicator

by pressing the save icon located in the top left hand corner of the software.

 Export the image by selecting the export icon from the barcode icon in the top left-

hand corner

 Press the download icon

 Select the necessary serial port and baud rate and click “download”.

10.0 PARAMETER SETTINGS

Pressing the [M+] key allows the user to access the parameters for customising the

indicator. The parameters are split into 3 groups-

1. Unit parameters (P1 Unt)

2. Communication parameters (P2 trA)

3. Indicator Functions parameters (P3 FUN)

 When [M+] is held down for 3 seconds, the display will first show “P1 Unt” for Unit

parameters.

 Press the [MR] key to advance through the groups “P1 Unt”, “P2 trA” , “P3 FUN”.

Press [Mode/Print] to enter the desired group of parameters.

 If you press [Zero], the indicator will exit the User Parameter section and return to

normal weighing.