Product Manual



12.1.5 Calibration store and restore setting (P8 EC)

Parameter Description Option

E1 ruL “E1 ruL” will display for 1 second,

XXXX is the calibration value.

For example, if you do not have the

suitable weights by entering the

calibration value this can then be

restored.

Press [Units] to modify the

calibration value and move the

flashing digit.

Press [Tare] to increase and

[Zero] to decrease the numeric

values then press [Mode/Print]

to move onto the next setting.

E2 Ldo “Ldo” will display for 1 second,

XXXX is the value of multistage

calibration/linearity.

It has 4 parameters, if user has

carried out multistage calibration then

the parameters are effective. The

values can be enter which means

multi stage calibration does not need

to be done.

The setting will go through the

various parameters of the

multistage calibration.