Product Manual

3.5 PARTS COUNTING

The scale can be used to count parts based on the average weight of a previously weighed

sample by following these steps:

1) Zero the scale and tare the weighing container.

2) Press the [Func] key

3) The digits [1] and [6] can be used to scroll through the

different weighing applications, press until ‘count’ appears

on the display.

4) Press the [Tare] ↵ key to activate

5) Once activated, the ‘PCS’ label will appear on the top right-

hand side of the display.

6) Load the parts sample to be counted by pressing the

[SMPL] key, and by pressing the desired number on the

keypad e.g. 20.

7) Press [Tare] ↵ to confirm the number of parts.

8) The total number of parts will appear on the display, adding or removing parts will

adjust the parts count on the display accordingly by applying the average piece

weight to the weight of the parts to be counted.

9) During parts counting the display can be changed to show the net weight, unit weight

and number of parts by each time pressing the [Func] key.

10) To return to weighing, press [Unit] when “0 pcs” is displayed.

NOTE: If the parts are too light to measure accurately, the count may become faulty. It is

suggested that the samples to be weighed should each weigh more than the resolution of the

scale.