Product Manual

© Adam Equipment Company 2017 20
Err 19
Weight lower limit is larger than
upper limit
High limit is set first, then the low limit is
set higher than the high limit and low
limit not equal to zero.
Err 20
PLU storage/ reading is more
than 50
PLU number above max range of 50
Err ADC
Can’t find ADC chip Damaged or missing ADC chip
Load cell is damaged.
Electronics is damaged.
---OL---
Weight over range Weight over scale range
---Lo---
Below gross zero 20e Weight below scale range
10.0 SERVICE INFORMATION
This manual covers the details of operation. If you have a problem with the scale
that is not directly addressed by this manual then contact your supplier for
assistance. The supplier will need the following information which should be kept
ready:
A. Details of your company
-Name of your company:
-Contact person’s name:
-Contact telephone, e-mail, fax or any other
methods:
B. Details of the unit purchased
(This part of information should always be available for any future correspondence. We
suggest you to fill in this form as soon as the unit is received and keep a print-out in your
record for ready reference.)
Model name of the scale:
Serial number of the unit:
Software revision number (Displayed when
power is first turned on):
Date of Purchase:
Name of the supplier and place:
C. Brief description of the problem
Include any recent history of the unit. For example:
-Has it been working since it was delivered
-Has it been in contact with water
-Damaged from a fire
-Electrical Storms in the area
- Dropped on the floor, etc.