Product Manual

© Adam Equipment Company 2008
10
3.3.2 SETTING UP THE CPWplus
plusplus
plus P SERIES (FOR USA ONLY)
The CPWplus scale can be ordered with the Pillar or the Pillar can be added
at a later stage to convert the scale into the Pillar version (Currently the
Pillar version is available in USA only).
1 The Pillar comes separately
packed. Remove it from the
packaging.
2 Connect the cable attached to
the Pillar to the connector inside the
plastic socket situated at the base.
Tighten the ferrule to secure the
cable.
3 Place the Pillar inside the
plastic socket in the upright position
and secure it with the M6 screws.
4 Attach the bracket with the
indicator to the top of the Pillar using
normal screws. Connect the cable to
the connector as before.
5 To adjust the angle of the
indicator, use the two thumb screws
on the side of the bracket that
connects the indicator.
Indicator
Bracket
Pillar
Socket
Base
Thumb screw