Product Manual

© Adam Equipment Company 2008
14
7.0 BATTERY
• CPWplus standard and CPWplus-P (for USA only) can be
operated from 6x AA batteries, if desired.
•
CPWplus-W, CPWplus-M and CPWplus-L scales have an
internal rechargeable battery. When the battery needs
charging a symbol on the display will turn on. The battery
should be charged when the symbol is on.
• To charge the battery, connect the power supply module to
the rear of the indicator and apply power. The scale need not
be turned on.
• The battery should be charged for 12 hours for full capacity.
The battery life is approximately 60 hours.
8.0 BACKLIGHT
The backlight for the LCD can be set by the user to always off, always
on or automatic (on only when the scale is in use or a key is pressed).
See setting of the parameter in section 13.1.2.
9.0 AUTO POWER OFF
The auto power off can be set by the user to disable the feature or to a
pre-set time interval. See setting of the parameter in section 13.1.1.
10.0 OPERATIONS
10.1 SWITCHING ON THE SCALE
• To switch on the scale, press the [On/Off] key.
• The display will show the software revision number and then
flash all the digits and symbols before counting down to zero.
This ensures all LCD segments are working. The last active
weighing unit will be displayed.