User Manual
© Adam Equipment Company 2010
6
3.2 LOCATING
• The scales should not be placed in a location that will reduce
the accuracy.
• Avoid extremes of temperature. Do not place the scale in
direct sunlight or near air conditioning vents.
• Avoid unsuitable surfaces. The table or floor should be rigid
and free from vibration.
• Avoid unstable power sources. Do not use the scale near
large users of electricity such as welding equipment or large
motors.
• Do not place the scale near vibrating machinery.
• Avoid high humidity that might cause condensation. Avoid
direct contact with water. Do not spray or immerse the scales
in water.
• Avoid air movement such as from fans or opening doors. Do
not place the scale near open windows or air-conditioning
vents.
• Keep the scales clean. Do not stack material on the scales
when they are not in use.