Product Manual

P a g e 1 © Adam Equipment Company 2010
1.0 CONTENTS
1.0 CONTENTS ..........................................................................................1
2.0 INTRODUCTION...................................................................................3
3.0 INSTALLATION....................................................................................5
3.1 UNPACKING......................................................................................5
3.2 LOCATING.........................................................................................5
3.3 SETTING UP THE SCALES...............................................................6
4.0 KEY DESCRIPTIONS ...........................................................................7
5.0 DISPLAYS ............................................................................................8
5.1 WEIGHT DISPLAY.............................................................................8
5.2 UNIT WEIGHT DISPLAY....................................................................9
5.3 COUNT DISPLAY ..............................................................................9
5.4 OTHER SYMBOLS ............................................................................9
6.0 OPERATION.......................................................................................10
6.1 ZEROING THE DISPLAY.................................................................10
6.2 TARING............................................................................................10
6.3 PARTS COUNTING .........................................................................11
7.0 USER PARAMETERS ........................................................................14
8.0 CALIBRATION....................................................................................16
9.0 RS-232 INTERFACE...........................................................................17
9.1 INPUT COMMANDS FORMAT ........................................................20
9.2 RS-232 SETUP ................................................................................21
9.3 REAL TIME CLOCK SETUP ............................................................23
9.4 AUTO SLEEP FUNCTION ...............................................................24
10.0 BATTERY AND BACKLIGHT OPERATION....................................24
10.1 BATTERY......................................................................................24
10.2 BACKLIGHT FOR LCD .................................................................25
11.0 ERROR CODES...............................................................................26
12.0 SERVICE PARAMETERS................................................................27
12.1 USING “0000” TO ENTER THE CALIBRATION PARAMETER .....27
13.0 REPLACEMENT PARTS AND ACCESSORIES..............................29
14.0 SERVICE INFORMATION ...............................................................31
15.0 WARRANTY INFORMATION ..........................................................32