User's Manual

6.3.4 Count pre-set or check-weighing

Check-weighing (or Count Pre-setting) is a procedure to cause an alarm to

sound when the net weight (or the number of items) on the scale meets or

exceeds a number stored in memory. The value to be stored is entered

from the keyboard.

SETTING OF PRESET LIMITS

It is possible to set a high and low limit for either counting or weighing

(using net weight). When the [Pst] key is pressed the user can select

either counting or weighing and then set the lower and upper limit.

For example:

ACTION DISPLAYS

Press [Pst]

“PST ” “ nEt “ “ “ if currently in the weighing mode

Press

[U.Wt/Units]

“PST ” “ cnt “ “ “ to toggle from weighing to counting

Press [Print]

“Hi cnt” “0.3 2 3 4” “ ” The current high count limit is

displayed, press [CE] to clear and change if needed.

Press [Print]

“lo cnt” “0.0 2 3 4” “ ” The current low count limit is

displayed, press [CE] to clear and change if needed.

Press [Print]

Return to weighing with limits set.

• Clearing of either or both the limits is allowed. Both limits cleared will

disable the Preset altogether.

• If Preset Weight was selected the first display would show “Hi net” and

“lo net”.

• The beeper will work as described in the Beeper Parameter.