Data Sheet

ELYLITE
®
CURV COMPOSITE PANEL
The Elylite
®
Curv panels are composed of two self-reinforced polypropylene skins combined with a
honeycomb core (HC), joined together by adhesive bonding. The panels consist of polypropylene (PP)
with a thin (70 micron) protective layer of PET and are consequently very cost effective and even
easy to glue.
These ultra light weight panels are designed to meet the highest performance characteristics in
stiffness and impact resistance, and are easily recyclable. The panels have been tested at tempera-
tures as low as -30°C. Unlike typical polymer materials, the Curv material is known not to show any
brittleness even at extremely low temperatures.
Composition
• Polypropylene honeycomb core with a density of 60 kg/m
3
.
• Two Curv skins of 0.92 mm. The skins are a 100% polypropylene (PP) composite; they consist of a unique woven structure of stretched PP bers,
protected by a thin (70 micron) layer of PET.
• Joined together by a high performance adhesion system.
Dimensions
Thickness 9.7 mm
Size 1250 x 2850 mm
Colors
Black / grey
(Black Curv skins are UV-resistant)
Weight
2.4 kg/m²
Deflection
Deflection (mm) (*) L = 1000 mm, W = 1000 mm, P = 100 N/m
2
(Mtot = 10 kg)
Panel of 9.7 mm 12.00
(*) calculated values including bending and shear stiffness.
Impact resistance
The Curv skins have an exceptionally high resistance to impact.
Permanent deformation (mm) M = 2 kg, H = 1000 mm, diameter = 20 mm
Sandwich with 0.92mm Curv as skin 1.83
Sandwich with 1mm aluminium as skin 6.58
Fire behavior
Uncoated Curv skins correspond to Class B2 according DIN 4102 which is described as “normal
flammability”.
The polypropylene honeycomb core material is estimated to correspond to Class B2.
Weather resistance
• Elylite
®
Curv composite panels are stable within a temperature range from -40 °C to +80 °C.
• Elylite
®
Curv composite panels are resistant to salt water, oil, fats and most other agents.
• Black Curv skins guarantee excellent UV-protection and do not show any signicant signs of ageing compared to other similar polymer materials.
• Water absorption of the panels is minimal.
Elylite
®
Curv is a registered trademark of Elytra nv, Belgium.
Adam Hall GmbH · Daimlerstr. 9 61267 Neu-Anspach Germany
Tel.: (+49) 60 81 / 94 19 0 Fax.: [phone] e-mail: [e-mail]
DATENBLATT
DATA SHEET I FICHE TECHNIQUE I HOJA DE DATOS
EN
Gauze for Outdoor Events
The mesh, most likely named after the Palestinian city of Gaza, is used for open-air events, where it is used in the panelling of stage structures,
FOH and delay-towers, podiums and for setting up stages. Known in English as “stage mesh”, the material also serves as backdrops, stage
curtains and especially for privacy and as protection against dust and wind.
Gauze can be easily attached with cable ties to all carrier systems and trusses, protects technology as well as performers whilst offering a professional stage
appearance.
Main Features of Adam Hall Gauze
The mesh fabric, made of polyethylene, has special characteristics and is suitable for a broad scope of applications: it is extremely tear-resistant,
structurally stable, while being lightweight and classified as a B1 flame retardant according to the DIN 4102 standard. It is also
water-resistant, weatherproof, UV resistant and last but not least, it is washable.
Gauze is a Wind-Permeable!
The most important feature of the stage gauze is its wind permeability. It prevents the sail effect and ensures stability for mobile constructions, even at
higher wind speeds. Adam Hall offers this material in four different grades ranging from fine to loose knit, with wind permeability factors
of 16 to 50%. So, the stability of stage structures can be accurately calculated and the appropriate mesh selected according to the weather forecast and
wind strength.
Gauze and Transparency
The weave structure also determines the levels of blackout and sound permeability. Therefore, loose-knit mesh is suitable
for covering speaker towers, while the particularly fine-mesh material is already opaque from a distance of five metres.
Further Uses for Gauze
Thanks to its special properties, the polyethylene gauze is not only used in the event-technology – it is for example ideally suited as turf protection,
because it is breathable, for the lining of trade fair stands, as paintball netting and for fence panel covering. With the B1 classification, it is also
suitable as a cover for sprinkler systems on ceilings.
Type: 100 201 202 203
Texture: very fine mesh,
high density
very large mesh,
very open
medium mesh,
open
fine mesh,
dense
Opacity: very high, non-transparent
from a distance of 5 m
approx.
not opaque medium, non-transparent
from a distance of 25 m
approx.
high, non-transparent from a
distance of 8.5 m approx.
Wind Permeability 16% 50% 37% 27%
UV Resistance: UV and fade resistant for up
to 3 years
UV and fade resistant for up
to 3 years
UV and fade resistant for up
to 3 years
UV and fade resistant for up
to 3 years
Temperature Range: -30°C to +70°C -30°C to +70°C -30°C to +70°C -30°C to +70°C
Properties: weatherproof, acid and heat
resistant, water repellent
weatherproof, acid and heat
resistant, water repellent
weatherproof, acid and heat
resistant, water repellent
weatherproof, acid and heat
resistant, water repellent
Certifications: flame retardant according to
DIN 4102-B1, M1 certified
flame retardant according to
DIN 4102-B1
flame retardant according to
DIN 4102-B1
flame retardant according to
DIN 4102-B1, empa certified
Weight: 250 g/m² 125 g/m² 140 g/m² 160 g/m²
To be used for: open-air stage mesh, site
fence, exhibition stand clad-
ding, privacy screen, wind,
sun and dust screen
open-air stage mesh, paint-
ball netting
open-air stage mesh open-air stage mesh, grass
protection matting, site
fence
Colour Options: Black, White Black, White Black, White Black, White
Versions: ready-made with eyelets and
seams, sold by the metre
ready-made with eyelets and
seams, sold by the metre
ready-made with eyelets and
seams, sold by the metre
ready-made with eyelets and
seams, sold by the metre