User Manual
S4X-V
The S4X-V
The two versions of the S4X are intended for use in medium and
larger control rooms. They are an ideal choice for film, television and
broadcast recording studios where the highest quality standards
must be observed.
The S4X-V has been designed for vertical installation. This reference
monitor features the same X-ART and 6” HexaCone midrange as
the S4X-H allowing for almost identical tonal characteristics of both
speakers. This allows combinations of the different versions in bigger
multi-channel applications without tonal imbalance.
Basic technical data at a glance
• X-ART tweeter
• 6” HexaCone midrange
• 12” HexaCone woofers
• 50W/2 x 250W amplification
• sophisticated control panel on the front
• 28Hz - 50kHz
• 126dB max peak SPL per pair
• 5 years warranty
Midfield Monitor S4X-V
Drivers & amplifiers
To allow the X-ART tweeter to extend to its highest frequencies, it
is combined with a unique ADAM Audio A/B amplifier. This unique
amplifier (see p. 37) has ultra low distortion and an immense internal
bandwidth of more than 1MHz. Combine this amplifier with the
X-ART tweeter and you get a fascinating sound that is effortless and
of the highest resolution.
Furthermore, the S4X-V features a newly developed 12” HexaCone
woofer. This driver, with electronic correction, has been designed for
optimal results in a bass-reflex cabinet. An exceptionally long 3” voice
coil coupled with a very strong and highly effective magnet system
provides for powerful, yet never overemphasized bass reproduction.
Improperly designed larger monitors are always at risk of
compromising the overall sound with bass reproduction that is too
intense. As in all ADAM Audio designed speakers, both versions of
the S4X have been designed to combine both the power and volume
of the bass (28Hz at -3dB point) with the highest possible precision.
Combine this with the transparent high and midrange frequencies of
the S4X and this will give an engineer a new quality level of control
and performance for larger rooms.
17