User's Manual
Table Of Contents
- CONGRATULATIONS!
- CONTENTS
- 1. IMPORTANT SAFETY INSTRUCTIONS
- 2. WHY CHOOSE ADAM AUDIO?
- 3. INTRODUCING S SERIES
- 4. CONNECTIONS
- 5. GETTING STARTED
- 6. ACHIEVING OPTIMUM LOUDSPEAKER PLACEMENT
- 7. LOUDSPEAKER VOICING OVERVIEW
- 8. S SERIES DSP FUNCTIONS IN FULL
- 9. TROUBLESHOOTING
- 10. MAINTENANCE
- 11. SHIPPING
- 12. ENVIRONMENTAL INFORMATION
- 13. EU DECLARATION OF CONFORMITY
- 14. WARRANTY TERMS
- 15. TECHNICAL DATA
13
S SERIES MANUAL [ENGLISH]
Input Selection
In addition to their traditional analog inputs, the S Series models all have AES3 digital
inputs. This setting allows users to choose which inputs are currently active, and cycles
between ‘Analog’ and ‘AES L’ and ‘AES R’ in the display. The latter two settings allow
you to define which of your speakers is the Left and which the Right when driving them
with an AES3 digital input in a ‘daisy-chain’ configuration [see diagram below].
AES3 Setup
Left Channel Right Channel
AES3 out
AES3 in
AES3 in
AES L AES R
Source
XLR
AES3 out