User Manual

11
S SERIES MANUAL [ENGLISH]
8. S SERIES DSP FUNCTIONS IN FULL
With the exception of the extra ‘Classic’ voicing preset in the S3H noted on the previous
page, the DSP functions on all S Series models are the same. In each case, the functions
are accessed from within nested menus on the rear-panel, five-line OLED display by
means of the adjacent dual-function rotary encoder/button.
8.1 Navigation & Parameter Editing
Throughout the S Series DSP interface, tapping the encoder briefly moves DOWN
through the menu structure [or confirms the selection of a parameter, as we will see],
while clicking and holding the encoder down for more than half a second steps back
UP through the nested levels.
When you turn the speakers on, the heading for a general system-wide Settings menu
appears on the display. If you tap the encoder while ‘Settings’ is displayed, you descend
into the list of individual options in the Settings menu, of which more in a moment. If
you instead simply rotate the encoder while ‘Settings’ is displayed, you leave the Settings
menu behind and step instead through the headings for the numbered voicing/EQ
presets 1 to 5 [after ‘Preset 5’ is reached on the display, one more turn of the encoder
loops you back to the ‘Settings’ menu heading, where you came in when the monitors
were powered up]. The individual parameters for the voicing presets can be viewed
[and, in the case of the user presets, edited] by descending into those presets: so to
ac cess Preset 4, you rotate the encoder until ‘Preset 4’ is shown on the display, and
then tap the encoder to activate the preset and bring up the parameters, whose values
you may then edit.
Settings Menu
Preset
Pure
Preset
UNR
Preset
User1
Preset
User2
Preset
User3
Settings
Menu (2)
Preset
Menu (3)
Preset
Menu (3)
Preset
Menu (3)
Preset
Menu (3)
Preset
Menu (3)
rotate
rotate
long
click click
long
click click
click
long
click click
long
click
long
click
click
long
click
click
rotate rotate rotate rotate rotate
rotate rotate rotate rotate rotate
Top Menu [1]: The highest level of the S Series DSP module menus, offering access to
the Settings Menu and the five EQ presets.