User's Manual
Table Of Contents
- CONGRATULATIONS!
- CONTENTS
- 1. IMPORTANT SAFETY INSTRUCTIONS
- 2. WHY CHOOSE ADAM AUDIO?
- 3. INTRODUCING S SERIES
- 4. CONNECTIONS
- 5. GETTING STARTED
- 6. ACHIEVING OPTIMUM LOUDSPEAKER PLACEMENT
- 7. LOUDSPEAKER VOICING OVERVIEW
- 8. S SERIES DSP FUNCTIONS IN FULL
- 9. TROUBLESHOOTING
- 10. MAINTENANCE
- 11. SHIPPING
- 12. ENVIRONMENTAL INFORMATION
- 13. EU DECLARATION OF CONFORMITY
- 14. WARRANTY TERMS
- 15. TECHNICAL DATA
9
S SERIES MANUAL [ENGLISH]
→
For stereo audio production, your ears should be placed as near as possible to
one corner of an equilateral triangle, with the two speakers at the other corners
[see below].
→ Precise idealized placements of speakers for surround audio production depend on
the number of channels [and therefore speakers] you are using, and whether your
audio is being produced for musical or film use. The International Telecommunication
Union recommendations on ideal loudspeaker placement for a variety of audio formats
and applications can be found in detail at their web site, www.itu.int. However, as
general guidance and in common with stereo placement, a symmetrical listening
position is recommended, with all speakers a] situated at least 400 mm [16 inches]
from the nearest wall to minimize back reflections, and b] pointing as much as possible
toward the listener‘s ears.