User's Manual
Table Of Contents
- CONGRATULATIONS!
- CONTENTS
- 1. IMPORTANT SAFETY INSTRUCTIONS
- 2. INTRODUCING T SERIES
- 3. OPTIMAL PLACEMENT OF YOUR MONITORS
- 4. REAR-PANEL FEATURES
- 5. AUDIO CONNECTIONS AND LEVEL SETTINGS
- 6. USING THE HF AND LF SWITCHES ON THE REAR PANEL
- 7. TROUBLESHOOTING
- 8. MAINTENANCE
- 9. SHIPPING
- 10. ENVIRONMENTAL INFORMATION
- 11. EU DECLARATION OF CONFORMITY
- 12. WARRANTY TERMS
- 13. TECHNICAL DATA
13
T SERIES MANUAL [ENGLISH]
→ While playing audio, fine-tune the Level control knob setting on each monitor to
attain the listening volume you desire. If your monitors are placed properly in a
symmetrical room [see Section 2 of this manual], the settings for the Level control
knobs on both monitors should be the same to achieve equal playback volume and
balanced imaging.
→
All pro audio monitors require some burn-in time to reach their optimal performance.
Please play complex program material through your T Series monitors for at least
eight hours before using them on a critical project.
→ At the end of each session, turn off your T Series monitors before powering down
any equipment connected to them.