User's Manual

6
T SERIES MANUAL [ENGLISH]
while a 50 W amp serves the woofer. The new Class D amps, in combination with the
U-ART’s powerful 4:1 velocity transfer ratio [the tweeter’s ability to move air four times
as much as other designs], let you listen at very loud levels without listening fatigue.
DSP-controlled driver crossovers ensure there are no holes at the crossover frequency
between drivers—when mixing, what you hear is what you get. This precision is comple-
mented by the T Series’ all-new beveled cabinets, which minimize diffraction to produce
superior imaging that lets you hear the discrete placement of panned tracks in the
stereo field with pinpoint accuracy.
VERSATILE CONNECTIONS AND CONTROLS
On the rear side of each T Series monitor, a sturdy metal backplate is home to a
comprehensive assortment of controls and analog input connections that adapt
your monitors to virtually any professional system:
→ A balanced XLR connector and unbalanced RCA jack allow connection to professio-
nal mixers and I/O boxes using +4 dBu or -10 dBV nominal operating levels.
→ Each monitor has its own level control, which is especially useful to balance output
levels between left and right monitors when they’re used in an asymmetric control
room.
→
Two 3-way switches respectively adjust the monitors’ high- and low-frequency
responses ±2 dB or select flat response, adapting the monitors to any room’s
acoustic signature.
→ T5V, T7V and T8V can automatically accept AC voltages ranging from 100 to 240 V, at
50/60 Hz — simply activate the power switch for each monitor and go!
Please see Section 3 of this manual for an illustrated key to the T Series’ rear-panel
connections and controls. Optimal use of rear-panel connections and controls is
ex plained in greater detail in Sections 4 and 5 of this manual.