Technical data

6
2.1 Important Information for setup
After having unpacked your loudspeakers, please allow the system to acclimate
to the temperature of the room for approximately an hour.
We recommend using high quality cables to guarantee optimal performance.
We recommend that you retain the original packaging, as it is the best way to
guarantee safe transportation should the need to do so arise.
The loudspeakers will take some break-in time to achieve optimum sonic
performance.
2.2 Connecting the loudspeakers
a) Before connecting the loudspeakers to your audio components make sure that
the audio source is switched off and set the level controls fully counterclockwise.
b) Connect the speaker terminal with your audio
source (i.e. stereo/multichannel amplifier,
A/V receiver etc.) by using speaker wires with
stripped bare ends or banana plugs.
c) Make sure that the line out level (volume) of your stereo is either at a low level or
all the way off. Then switch on your audio system.
d) Turn on your source of music and adjust the volume carefully.
2. Quick Start