Adam Equipment IHS/IHSa SERIES Software version 1.0/A1.
Easy Reference: Model name of the scale: Serial number of the unit: Software revision number (Displayed when power is first turned on): Date of Purchase: Name of the supplier and place: © Adam Equipment 2016 2
1.0 CONTENTS P.N. 700660189, Revision D2, November 2016 1.0 CONTENT 3 2.0 INTRODUCTION 4 2.1 INTRODUCTION 4 2.2 TECHNICAL SPECIFICATION 5 2.3 SAFETY NOTICE 6 2.4 KEY DESCRIPTION (IHS/IHSa) 6 2.5 DISPLAY (IHS/IHSa) 8 OPERATION 8 3.0 3.1 SAFETY INSTRUCTION 8 3.2 BATTERY OPERATION 9 3.3 CHARGING BATTERY 10 3.4 BASIC OPERATION 10 3.5 REMOTE CONTROLLER 11 4.0 CALIBRATION 11 5.0 PARAMETER 12 5.1 ENTER SETTING MODE 12 5.
2.0 INTRODUCTION 2.1 INTRODUCTION The IHS/IHSa Series is a range of heavy-duty crane scales used to weigh very large masses. The main features include: • Easy Operation & Rugged construction • 30mm super big & bright red LED display with view angle. • 360 degree rotary safety hook design, easy to use • Hold feature • Overload safety up to 200% • One charge can last 150 hours • Auto power off after 30 minutes of non use • 7.
2.2 TECHNICAL SPECIFICATIONS Model No Capacity Division Model No. Capacity Division IHS 1 1000kg 0.2kg/0.5kg IHS 2a 2000lb/1000kg 0.5lb/0.2kg IHS 3 3000kg 0.5kg/1kg IHS 6a 6000lb/3000kg 1lb/0.
2.3 SAFETY NOTICE The limit stated below is the Ultimate Overload Limits of the scales. Adam Equipment Co. Ltd. Its directors, owners and affiliated companies and organisations cannot be held liable for any resulting damage or injury sustained as a result of the machines being used in excess of their stated capacities or ultimate overload limits. Model NO.
[On/Off] Power switch- use this key to turn on and turn off the scale. [Change] Division change key- use this key to change division. When in setting mode, use this key to change parameter. [Hold] Hold function; use this key to lock the display. There is a LED indication light on the bottom of the display. Press the [Hold] key again, to cancel HOLD function. [Zero] Re-zero key- use this key to return to zero reading. 2.
[On/Off] Power switch- use this key to turn on and turn off the scale. [lb/kg] Unit change key-use this key to select the weighing unit of lb or kg. When in setting mode, use this key to change parameter. [Hold] Hold function, use this key to lock the display. There is a LED indication light on the bottom of the display. Press the [Hold] key again, to cancel HOLD function. [Zero] Re-zero key- use this key to return to zero reading. 2.
• Do all inspection and maintenance work when the scale is not in use. • Do not expose the scale to extreme temperatures. The operating temperature range is 0° C to 40° C. • Secure the sample to be weighed in the hook of the scale. Ensure that the sprung Safety Lever returns to its resting position which prevents the sample from slipping out of the hook. • Do not exceed the maximum capacity of the Scale. • Clean and protect your scale after use. 3.
3.3 CHARGING BATTERY • Plug the power supply into the mains power, then into the back of the IHS scale. • The red indicator lamp will illuminate to indicate that the battery charger is functioning properly. • The green indicator lamp will illuminate to indicate that the battery fully charged. 3.4 BASIC OPERATIONS Power on and off- Press [On/Off] key to turn on the scale. Then the display on the scale will show [88888]. Press again to turn off the scale.
Overload Warning-: please do not add any item that exceeds the maximum capacity of the scale. When the buzzer is sounded and the display shows”-----”, remove the item to avoid damage to the load cell and scale. 3.5 REMOTE CONTROLLER A: Determine increments in which the weight display B: Hold the settled values C: Zero the scale D: Backlight (only used on scales with LCD display) 4.0 CALIBRATION • Hold [Zero] when the scale is powered on. • The display on the scale will show “SPAN”.
** To calibrate in pounds (lb) make sure that the scale is lb mode before commencing, to calibrate in kilograms (kg) make sure the scale is in kg mode before commencing. When using slings, chains or other material to support the calibration mass, these items should be hung from the scale before setting the zero point so that when the calibration mass is added, only the weight of the calibration mass is measured by the scale. If an error is detected when calibrating an error message will be shown.
5.
WARRANTY STATEMENT Adam Equipment offers Limited Warranty (Parts and Labour) for any components that fail due to defects in materials or workmanship. Warranty starts from the date of delivery. During the warranty period, should any repairs be necessary, the purchaser must inform its supplier or Adam Equipment Company. The company or its authorised Technician reserves the right to repair or replace the components at any of its workshops at no additional cost, depending on the severity of the problems.
WEEE 2012/19/EU This device may not be disposed of in domestic waste. This also applies to countries outside the EU, per their specific requirements. Disposal of batteries (if fitted) must conform to local laws and restrictions. Cet appareil ne peut être éliminé avec les déchets ménagers. L’élimination de la batterie doit être effectuée conformément aux lois et restrictions locales. Dieses Gerät nicht mit dem Hausmüll entsorgt.
ADAM EQUIPMENT is an ISO 9001:2008 certified global company with more than 40 years’ experience in the production and sale of electronic weighing equipment. Adam products are predominantly designed for the Laboratory, Educational, Health and Fitness, Retail and Industrial Segments.
