Technical data

4
1.1 Important Information
Before you start to install the DA-SX, please make sure that the loudspeakers are
being switched off and also to unplug the power plug.
Please act with caution while installing the converter. It has been design to
perfectly fit into the slot. If you feel too much resistance when trying to insert
the DA-SX, do not use too much force. In case of problems please contact our
support team.
1.2 Installation
a) Unscrew the two screws of the blind plate on the rear side of your speaker. Take
off the blind plate.
b) Insert the DA-SX in the slot. If you feel a resistance, this could be caused by the
two capacitors in the slot. In this case, push them gently to the side.
c) Use your thumb to push in the converter all the way into the slot.
d) Use the two screws to screw in the panel tight.
1. Installation
Channel
S/PDIF
AES3
Word Clock In
Digital
Thru
Att.
Mode
DIGITAL INPUTS
Clock
XLR
-0dB -20dB
-10dB -30dB
-40dB
Coax Optical
L R
Channel
S/PDIF
AES3
Word Clock In
Digital
Thru
Att.
Mode
DIGITAL INPUTS
Clock
XLR
-0dB -20dB
-10dB -30dB
-40dB
Coax Optical
L R