S7A MK2 Operation Manual / Bedienungsanleitung English / Deutsch S7A Mk2
Safety Instructions Please read the following safety instructions before setting up your system. Keep the instructions for further reference. Please heed the warnings and follow the instructions. Caution Risk of electrical shock Do not open Risque de shock electrique Ne pas ouvrier CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE BACK COVER OR ANY OTHER PART. NO USER-SERVICABLE PARTS INSIDE. DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFIED PERSONNEL.
Safety Instructions Protect the cord from being walked on or pinched. Always use fully checked cables. Defective cables can harm your speakers. They are a common source for any kind of noise, hum, crackling etc. Always keep electrical equipment out of the reach of children. Always unplug sensitive electronic equipment during lightning storms. The monitor should be installed near the socket outlet and disconnection of the device should be easily accessible.
Table of contents Safety Instructions..............................................2-3 4 1. Introduction........................................................5 2. 2.1 2.2 Quick Start.........................................................6 Important Information........................................6 Connecting the speakers....................................6 3. 3.1 3.2 3.3 3.4 Speaker Placement.............................................7-8 General recommendations.............................
1. Introduction Dear customer, Thank you for choosing the ADAM Audio S7A MK2 mainfield monitor. ADAM loudspeakers are built for maximum quality reproduction and audio perfection. With the S7A Mk2 you have selected one of the most ambitious speaker systems available. This main monitor meets highest expectations in sound quality and craftmansship. The S7A MK2 is suitable for main monitoring. It is an ideal tool for no-compromise sound reproduction in all larger environments.
2. Quick Start 2.1 Important Information for set up After having unpacked your loudspeaker, please allow the system to acclimate to the temperature of the room for approximately an hour. We recommend using high quality cables to guarantee optimal performance. It is important to ensure the speakers sit firmly on a solid surface! We recommend that you retain the original packaging, as it is the best way to guarantee safe transportation should the need to do so arise.
3. Speaker Placement 3.1 General recommendations Please make sure that there are no obstacles in the way from the monitor to your ears. You should be able to see the speakers completely. The distance to the surrounding walls should be at least 40 cm to avoid early reflections, which will degrade the sound. The loudspeakers should be aligned with the listener’s position. Please note that vibrating parts of nearby objects can mask the sound.
3. Speaker Placement 3.3 The Stereo Triangle If the loudspeaker is going to be used for stereo applications, the optimum listening position should be at the top of an imaginary equilateral triangle with the two loudspeakers should be placed at the other two points of this triangle. The loudspeakers should be aligned with the listener’s position. 3.
4. Speaker Adjustment 4.1 The front control panel On the front you will find a new, highly sophisticated control panel that allows detailed fine-tuning of your loudspeakers to your particular room acoustics and personal listening preferences. The following tips are intended to assist you at using the controls in the best manner. Please note that using the controls may have a great impact on the overall sound characteristics of your loudspeakers.
4. Speaker Adjustment 4.4 Driver Gain Whereas the ‘Input Gain’ raises or lowers the overall input sensitivity up to +/-10 dB, the ‘Driver Gains’ work only within the corresponding frequency range, raising or lowering from +/-2 to +/-6 dB. 4.5 High / Low Shelf EQs The other two controls operate in a different manner. The ‘High’ and ‘Low’ controls are shelving filters that progressively lower or raise frequencies below 150 Hz / above 6 kHz up to 6 dB (see Fig.).
5. Troubleshooting All ADAM products are designed and manufactured to the highest quality standards. However, if any problems with your speaker occur, we recommend to proceed as follows: 5.1 Problem: The LED shows normal operation (green) but there is either no or only a distorted audio signal. If both (all) speakers are affected, the reason can probably be found within the signal path. If only one speaker is affected, the problem will probably be within this speaker. a) Check the wiring.
6. Maintenance Please switch the loudspeaker off before cleaning! Please note that the diaphragms build up a magnetic field. Do not ply with magnetic items at close range to the diaphragms. Please make sure that no liquids get inside the cabinet. Do not spray any fluids on the speaker. Do not use a wet cloth for cleaning. Do not use flammable or acidic chemicals for cleaning. Do not touch the membranes of the loudspeakers. We recommend using a lint-free, damp cloth for cleaning.
9. EU Declaration of Conformity We, ADAM Audio GmbH whose registered office is situated at Ederstr.
10. Warranty ADAM Audio GmbH provides a five year limited warranty for this product. 10.1 Terms and Conditions This warranty is limited to the repair of the equipment or, if necessary, the replacement of parts or the product and return shipping within the country of purchase. This warranty complements any national/regional law obligations of dealers or national distributors and does not affect your statutory rights as a customer.
11. Technical Data 1 = long term IEC 265-8-Wrms / 10 min 2 = nominal IEC 265-8 = Peak Power 5 µsec Tweeter Velocity transfer ratio S7A MK2 X-ART 4:1 Equivalent diaphragm ø 56 mm / 2“ Midrange speaker (2x) X-ART Velocity transfer ratio Equivalent diaphragm ø Midwoofer (2x) Woofer cone material Subwoofer (2x) Subwoofer cone material Built-in amplifiers 3.5:1 146 mm / 5.
Notes/Notizen ............................................................................................................ ............................................................................................................ ............................................................................................................ ............................................................................................................ .............................................................
S7A MK2 Bedienungsanleitung Deutsch S7A Mk2
Sicherheitshinweise Bitte beachten Sie die folgenden Sicherheitshinweise, bevor Sie Ihre neuen Lautsprecher in Betrieb nehmen. Bitte heben Sie diese Anleitung auf. Bitte beachten Sie alle Warnungen und folgen Sie allen Anweisungen. Achtung Gefahr durch Stromschlag Nicht öffnen UM DIE GEFAHR EINES STROMSCHLAGES ZU VERRINGERN, ENTFERNEN SIE WEDER DIE RÜCKWAND NOCH SONSTIGE TEILE. DIE INNEREN BAUTEILE DÜRFEN NICHT VOM ANWENDER, SONDERN NUR VON QUALIFIZIERTEM FACHPERSONAL GEWARTET WERDEN.
Sicherheitshinweise Vermeiden Sie, dass Flüssigkeiten jeglicher Art ins Gehäuseinnere gelangen. Sprühen Sie weder Flüssigkeiten direkt auf das Gerät, noch nutzen Sie nasse Reinigungslappen. Bitte verwenden Sie keine brennbaren und ätzenden Chemikalien zur Reinigung dieses Produkts. Vermeiden Sie jede Berührung mit den Membranen der Lautsprecher und blockieren Sie nicht die Bassreflexöffnung. Gewährleisten Sie eine rückwärtige Luftabfuhr für eine notwendige Kühlung der Elektronik.
Inhalt Sicherheitshinweise.................................18-19 1. Einleitung................................................21 2. Quick Start zur Inbetriebnahme..............22 2.1 Allgemeine Hinweise...............................22 2.2 Anschluss der Lautsprecher. ..................22 3. 3.1 3.2 3.3 3.4 Empfehlungen zur Aufstellung.................23-24 Allgemeine Empfehlungen.......................23 Hochtöner in Ohrenhöhe.........................23 Zweikanal-Stereo. ................................
1. Einleitung Sehr verehrte Kundin, sehr verehrter Kunde, vielen Dank, dass Sie sich für einen Studiomonitor von ADAM Professional Audio entschieden haben! Sie haben ein professionelles und hoch auflösendes Aktivsystem zur zuverlässigen Beurteilung von Tonaufnahmen erworben, das mit dem Ziel größtmöglicher Perfektion und bestmöglicher Wiedergabequalität entworfen und gefertigt worden ist. Das Modell S7A MK2 wurde entwickelt für den Einsatz als Main-Monitor in großen Regieräumen.
2. Quick Start zur Inbetriebnahme 2.1 Allgemeine Hinweise zur Inbetriebnahme Nach dem Auspacken und der Aufstellung des Lautsprechers sollte dieser ca. eine Stunde unangeschlossen „ruhen”, um sich der jeweiligen Raumtemperatur anpassen zu können. Bitte beachten Sie, dass dieser Monitor, abhängig von Pegel und Nutzungsfrequenz, einige Tage benötigt, um seine optimale Klangqualität zu erreichen.
3. Empfehlungen zur Aufstellung 3.1 Allgemeine Empfehlungen Vermeiden Sie eine Aufstellung neben stark schallreflektierenden Objekten. Vermeiden Sie ebenfalls Hindernisse im Wege des Schalls zu Ihren Ohren. Sie sollten die Lautsprecher komplett sehen können! Die Abstände zu Wänden sollten nicht geringer als 40 cm betragen, um Early Reflections zu vermeiden. Die Lautsprecher sollten auf den Hörplatz hin ausgerichtet sein.
3. Empfehlungen zur Aufstellung 3.3 Zweikanal-Stereo Die gemeinhin günstigste Lautsprecheraufstellung im Zweikanal-Stereobetrieb ist das so genannte ‚Stereodreieck’. Die Lautsprecher und der Hörer stehen bzw. sitzen in den Eckpunkten eines gleichseitigen Dreiecks (60°-Winkel). Im Allgemeinen gilt, dass der Abstand der Lautsprecher zueinander dem Hörabstand entsprechen sollte. 3.
4. Lautsprechereinstellungen 4.1 Das Kontrollpanel Auf der Vorderseite finden Sie ein neu entwickeltes Kontrollpanel, das Ihre Lautsprecher an die jeweilige Raumakustik bzw. den persönlichen Geschmack anzupassen ermöglicht. Die folgenden Ausführungen sollen Ihnen helfen, die Einstellungsmöglichkeiten optimal nutzen zu können. Bitte beachten Sie: Die Nutzung dieser Einstellmöglichkeiten kann den Klang Ihrer Lautsprecher erheblich beeinflussen.
4. Lautsprechereinstellungen 4.4 Driver Gain Wärend der ‘Input Gain’ die Lautstärke ihres Lautsprechers für alle Frequenzbereiche gleichmäßig beeinflusst, regeln die ‘Driver Gains’ die Lautstärke für die entsprechenden Frequenzbereiche um +/-2 bis +/-6 dB. 4.5 High / Low Shelf EQs Die beiden weiteren Regler ‘High’ und ‘Low’ funktionieren anders als die ‘Driver Gains’. Diese so genannten Kuhschwanzfilter (Shelving Filters) arbeiten progressiv, d.h.
5. Fehlerbehebung Alle ADAM Produkte werden nach höchsten Qualitätsstandards gefertigt. Sollte wider Erwarten dennoch ein Problem auftauchen, empfehlen wir, zunächst folgende Maßnahmen durchzuführen: 5.1 Der Standby-Taster zeigt normalen Betrieb an (grün), es wird aber kein oder nur ein gestörtes Signal ausgegeben: Betrifft das Problem beide Lautsprecher, liegt die Ursache zumeist innerhalb der Signalkette; betrifft es nur einen Lautsprecher, ist wahrscheinlich dieser die Fehlerquelle.
6. Wartung und Pflege Schalten Sie vor jeder Reinigung die Lautsprecher am vorderseitigen Netzschalter aus! Verhindern Sie, dass Flüssigkeiten jeglicher Art ins Gehäuseinnere gelangen. Sprühen Sie weder Flüssigkeiten direkt auf das Gerät, noch nutzen Sie nasse Reinigungslappen. Bitte verwenden Sie keine brennbaren und ätzenden Chemikalien zur Reinigung dieses Produkts. Vermeiden Sie jede Berührung mit den Membranen der Lautsprecher.
9. Konformitätsbescheinigung Wir, die ADAM Audio GmbH mit dem eingetragenen Firmensitz in der Ederstr. 16, 12059 Berlin, Deutschland, erklären hiermit eigenverantwortlich, dass das Produkt S7A MK2 den folgenden Normen entspricht: EN 61000-6-1 : 2001 EN 61000-6-3 : 2001 EN 55020 : 2002 EN 55013 : 2001 Ebenfalls stimmt es überein mit der EU General Product Safety 2001/95/EC, und richtet sich nach folgendem Standard: EN 60065 : 2002.
10. Garantie 10.1 Die ADAM Audio GmbH gewährt auf Ihre aktiven Lautsprecher eine beschränkte Garantie von 5 Jahren. Alle Produkte werden nach den höchsten Qualitätsstandards entwickelt und hergestellt.
11. Technische Daten 1 = long term IEC 265-8-Wrms / 10 min 2 = nominal IEC 265-8 = Peak Power 5 µsec Hochtöner Geschwindigkeitstransformation Äquivalente Membran ø Mitteltöner (2x) Geschwindigkeitstransformation Äquivalente Membran ø Midwoofer (2x) Midwoofer Membranmaterial Tieftöner (2x) Tieftöner Membranmaterial Eingebaute Verstärker Tieftöner 1/2 S7A MK2 X-ART 4:1 56 mm / 2“ X-ART 3.5:1 146 mm / 5.
ADAM Audio GmbH Ederstr. 16 12059 Berlin GERMANY tel: +49 30-863 00 97-0 fax: +49 30-863 00 97-7 email: info@adam-audio.com ADAM Audio UK Ltd. email: uk-info@adam-audio.com www.adam-audio.com ADAM Audio USA Inc. email: usa-info@adam-audio.com Join us on Facebook ADAM Audio China email: china-info@adam-audio.com Follow us on Twitter S7A MK2 Manual/Bedienungsanleitung. Version 01.2015 English/Deutsch. All data subject to change without prior notice.