Spec Sheet

ManualsBrandsAdams Rite ManualsAccessoriesHeader Bolt with 1-1/2" Backset for Aluminum Stile Doors

Table Of Contents

Security for pairs of doors with single key turning is

possible with the 4016 Header Bolt. The three-point lock

easily secures the entire double door entrance when

working in conjunction with an MS

Deadlock.

4016 Header Bolt

Function

Adding the 4016 Header Bolt and the 4015 Threshold Bolt to a pivoted bolt MS

deadlock allows Maximum Security for pairs of doors by the turn of a single

key. Simultaneously extending the stainless steel hexbolts top and bottom and

pivoting the massive MS

bolt into the mating stile, the three-point lock secures

the entire double door entrance. The 4016 Header Bolt can be added to any

basic MS1850S, MS1850SN, MS1950 or for two-points top and bottom use with

1870/1870HM Cylinder-Operated Flushbolt. Not applicable to 7/8" backset locks.

Operation

360° turn of key or thumbturn in basic MS

deadlock throws

counterbalanced bolt into opposite door and hexagonal bolt into

header strike. Key can be removed only when bolts are in a

positively locked or unlocked position.

Speciﬁcations

DOOR/CYLINDER HEIGHT

• The standard version is designed for a 7’ door height with

cylinder height as low as 35". Added extension for up to a

10’ door available when ordering.

HEADER BOLT

• Hexagonal 3/8" ﬂat to ﬂat. Made of stainless steel.

ADJUSTMENT

• Exact adjustment of threaded rod to door height is locked

in place by hexagonal header bolt.

STRIKE

• For header bolt, a 1/2" diameter hole in metal frame

is suitable or, for non-metal installation, 4005 strike is

available.

STANDARD PACK AGE

• Packed separately with bolt guide, screws, and

attachment pin. Shipping weight: 1 lb.

4016 HEADER BOLT

ALUMINUM

GRADE 1

E82111

4005

STRIKE

BOLT

GUIDE

800.872.3267 • Fax 800.232.7329

10027 S. 51st Street, Ste 102

Phoenix, Arizona 85044

www.adamsrite.com

ARM-014-9/14

ACCESSORIES

A-5

Summary of content (2 pages)

PAGE 1
ACCESSORIES 4016 HEADER BOLT A-5 Operation 4016 Header Bolt 360° turn of key or thumbturn in basic MS® deadlock throws counterbalanced bolt into opposite door and hexagonal bolt into header strike. Key can be removed only when bolts are in a positively locked or unlocked position. Specifications DOOR/CYLINDER HEIGHT • The standard version is designed for a 7’ door height with cylinder height as low as 35". Added extension for up to a 10’ door available when ordering.
PAGE 2
A-6 ACCESSORIES 4016 HEADER BOLT All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions Installation 11/16" 5/8" BOLT 17.5mm THROW INSTALL ADAPTOR ARM TO LOCK FROM TOP WITH BOLT RETRACTED AS SHOWN. INSTALL PIN THROUGH SLOTS IN LOCK SIDE PLATES, PASSING THROUGH HOLES IN BOTH SIDES OF THE ADAPTOR ARM. 15.6mm PROJECTION TOP OF DOOR CUT TO SUIT CYLINDER HEIGHT 9/32" 7.1mm 1-13/32" 35.7mm 4-3/4" 120.