Datasheet

Bluetooth GPS Button & Signals
LED2
Externa
l Power
Socket
Power
Button
LED1
Bluetooth GPS Quick Tips
After acquiring your GPS, proceed with the following steps:
1. Install battery. Fully charge battery for at least eight hours the first few
uses.
Low battery When LED 1 flashes green light, it signals low battery. Connect GPS to a power
source for continuous operation and recharge simultaneously.
Charging When battery is being charged, LED 1 turns to orange light; When the battery has
been fully charged, LED 1 turns to green light.
 Removebatterywhileunitnotinuseforprolongedperiodoftime.
 UseACAdaptoroutput:+5.3V‐‐‐0.5ANote: