Wireless Bluetooth GPS Receiver User’s Manual
Contents Disciption 3 Product Features 3 2. Specification 4 2.1 Spec 4 2.2 Positioning Accuracy 4 2.3 Acquisition time 4 2.4 input & output 4 2.5 Power support 4 2.6 Dynamic condition 5 2.7 Dimension, Weight 5 2.8 Other function 5 3. LED indcator 6 4. Package contents 7 5. User guide 7 5.1. Charging 7 5.2. Power on 7 4.
Discription The GR29 is a Bluetooth GPS Receiver that can be used independently. Not only does it can transfer data with PDA, or Notebook via Bluetooth, but also it can transfer data through USB cable with those devices without Bluetooth. It is compact, stylish, and portable, even can be wore on the key chain, integrated the rechargeable polymer Lithium-ion battery made the product sensitivity while low power consumer.
Specification 2.1 Spec Frequency:1575.42MHz Channel: acquisition and track up to 16 satellites signal Receiver: L1, C/A code Update rate: 1Hz Minimum signal tracked: -158dBm 2.2 Positioning Accuracy: 2.5m CEP accuracy <2m CEP accuracy (DGPS, WAAS or EGNOS) Velocity: 0.1meter/sec 2.3 Acquisition time: Hot start: 4 sec. Warm start: 34 sec. Cold start: 42 sec. 2.4 Input & output: Bluetooth protocol: Serial Port Profile CSR BC04, 2.
2.6 Dynamic condition Altitude: 18,000 meter max. Velocity: 515meter/sec. max. Acceleration: 4G max. Jerk: 20meter/sec. 2.7 Dimension, Weight Dimension: 65 (L) ×28 (W) ×15 (H) mm Weight: 30g Operation Temperature: -10˚C - +60˚C Store Temperature: -20˚C - +60˚C Operation humidity: 5% to 95% no condensing 2.
LED indicator Status Color Indicator On Blue Blink interval 1/sec Information Searching bluetooth device Waiting for data transferring 1/sec Connected and start to transfer data Red On Low power Green On Charging N/A Off Working On Positioning Off Positioned Yellow GPS Power switch a. Power on: Yellow LED and blue LED on. b. Power off: Yellow LED and blue LED off.
Package contents • One GR29 Bluetooth receiver • One set Mini Car Charger • One Mini USB cable • One driver CD • One user manual User Guide 1. Charging t’s recommended to charge the battery for the first using. When the battery is full, the power LED will be off. It also can be charged with car charger or USB cable. 2. Power on 2.1 Switch on, yellow LED and blue LED on, GPS start to positioning; when it got the position, the yellow LED will start to blink. 2.
page8
www.adapt-mobile.