Installation Instructions
Page 3 - Revision 03
Drill 1/16” pilot holes in the marked
locations.
Attach the Plastic Brackets to the
cabinet back wall using four Slide
Screws.
Insert the Slides into the Plastic
Brackets and attach the assembly
to the cabinet bottom using four
Slide Screws.
NOTE:
If the Slides are not installed parallel, they may bind or be difcult to move during operation.
Remove the Rack and check the operation of each Slide.
With the Rack removed, if the Slides do not bind when opening and closing, the installation
should be adjusted to make the Slides parallel, both horiztonally and vertically.
STEP A4
STEP A5
STEP A6
Bottom Mount - STOP