Installation Instructions

P. 4
4814101-03 K-6815A-16A-18A Chrome slider instruction
Bottom mounting instruction – continued.
Step 4 Remove wire basket assembly from cabinet
and drill 1/16” pilot holes in the marked
locations.
Step 5 Screw plastic mounting brackets (#3) to back wall
using 4 screws (#4).
Step 6 Reinstall the wire basket assembly in
plastic mounting brackets and install 4
screws (#4) in the predrilled pilot holes
of front mounting bracket.
Note: It may be necessary to remove
the wire basket (#1) from the sliders
(#2) to make for easier installation of
the slider mounting screws (#4).
NOTE: There are holes in the end of sliders that may be used for mounting the
assembly if you prefer.