Installation Instructions

Page 2 - Revision 03
Attach Supports to Bottom Shelf
using Support Bolts.
NOTE: Insert the Support Bolts
through the inside of the Bottom
Shelf and thread into the Supports.
Attach Top Shelf to the Supports
using Support Bolts.
NOTE: Insert the Support Bolts
through the inside of the Top Shelf
and thread into the Supports.
Attach the Slides to the Bottom Shelf
using the Rack Screws.
NOTE: The Slides may be mounted
so that the Top Shelf is on the RIGHT
or LEFT side. It is recommended to
install the product so that the Top
Shelf is on the same side as the
closest cabinet side wall.
Place a Plastic Bracket on the end of
each Slide. Locate the assembly in
the cabinet.
NOTE: The front of the Slides should
be at least 1/2” back from the front
of the cabinet.
NOTE: For a face-frame cabinet,
make sure the assembly is located
far enough from the cabinet side
wall as to not strike the face-frame
during operation.
STEP 1
STEP 2
STEP 3
STEP 4
MOUNTING INSTRUCTIONS