Installation Instructions

P. 1

4814119 K-6839A Two-Tier Undersink Organzier

Parts list

#1 #2 #3

#7 #8

DESCRIPTION QTY

#1. Chrome steel shelf 1

#2. Upper chrome steel shelf 1

#3. Support bracket 2

#4. Slider mounting screws 8

#5. Basket mounting screws 4

#6. Plastic mounting brackets 2

#7. Bolts 8

#8. Sliders 1 left side, 1 right side

Install on bottom of cabinet 15” or wider

REQUIRED TOOLS

(not provided)

⊙ Drill

⊙ 1/16" Drillbit

⊙ Screwdriver

PAGE 1
Parts list #1 #2 #3 #4 #5 #6 #7 #8 DESCRIPTION #1. Chrome steel shelf #2. Upper chrome steel shelf #3. Support bracket #4. Slider mounting screws #5. Basket mounting screws #6. Plastic mounting brackets #7. Bolts #8. Sliders QTY 1 1 2 8 4 2 8 1 left side, 1 right side REQUIRED TOOLS (not provided) ⊙ Drill ⊙ 1/16" Drillbit ⊙ Screwdriver Install on bottom of cabinet 15” or wider P.
PAGE 2
Bottom mounting instruction Step 1 Attach support brackets (#3) to Chrome steel shelf (#1) using bolts (#7) and screwdriver. Step 2 Attach upper Chrome steel shelf (#2) to the upper shelf support brackets (#3) using bolts (#7) and screwdriver. Step 3 Screw sliders (#8) to Two Tiered assembly using 4 screws (#5) and screwdriver. Step 4 Place plastic mounting brackets (#6) on sliders (#8) and place Two Tiered assembly in the cabinet at least 1/2 “ back from front of cabinet.
PAGE 3
Bottom mounting instruction – continued. Step 6 Remove wire basket assembly from cabinet and drill 1/16” pilot holes in the marked locations. Step 7 Screw plastic mounting bracket (#6) to back wall using 4 screws (#4). Step 8 Reinstall the Two Tiered assembly in the cabinet and install 4 screws (#4) in the predrilled pilot holes of the front mounting bracket. Note: The Two Tiered under-sink wire organizer may be installed with the upper shelf on the right or left side.