Installation Instructions

P. 3
4814119 K-6839A Two-Tier Undersink Organzier
Bottom mounting instruction – continued.
Step 6 Remove wire basket assembly from cabinet and drill
1/16” pilot holes in the marked locations.
Step 7 Screw plastic mounting bracket (#6) to back wall
using 4 screws (#4).
Step 8 Reinstall the Two Tiered assembly in the
cabinet and install 4 screws (#4) in the
predrilled pilot holes of the front
mounting bracket.
Note: The Two Tiered under-sink wire
organizer may be installed with the
upper shelf on the right or left side.
Just remove the assembly from the
sliders and turn to the other side.
Note: It may be necessary to remove the chrome steel shelf assembly from
the sliders (#2) to make for easier installation of the slider mounting
screws (#4).
Note: There are holes in the end of sliders that may be used for mounting
the assembly if you prefer.