Installation Instructions

P. 1

4814107 K-6886A 32QT Trash can

Parts list

DESCRIPTION

QTY

#1. Wire rack

#2. Sliders

1 left side, 1 right side

#3. Side wires

#4. Slider mounting screws

#5. Rack mounting screws

#6. Trash can

Install on bottom of cabinet 11” or wider

REQUIRED TOOLS

(not provided)

⊙ Drill

⊙ 1/16" Drillbit

⊙ Screwdriver

PAGE 1
Parts list #1 #2 #3 #4 #5 #6 DESCRIPTION #1. Wire rack #2. Sliders #3. Side wires #4. Slider mounting screws #5. Rack mounting screws #6. Trash can QTY 1 1 left side, 1 right side 2 8 4 1 REQUIRED TOOLS (not provided) ⊙ Drill ⊙ 1/16" Drillbit ⊙ Screwdriver Install on bottom of cabinet 11” or wider P.
PAGE 2
Bottom mounting instruction Step 1 Screw trash can wire rack (#1) to the sliders (#2) using 4 screws (#5). Step 2 Place assembly in cabinet at desired location at least 2” back from the front of cabinet to front mounting bracket. Using a pencil, mark the mounting holes (2) in each mounting bracket. Step 3 Remove the trash can wire rack assembly from cabinet and drill 1/16” pilot holes in the marked locations. P.
PAGE 3
Bottom mounting instruction – continued. Step 4 Reinstall the trash can wire rack assembly and install 8 screws (#4) in the predrilled holes locations. Note: It may be necessary to remove the wire rack (#1) from the sliders (#2) to make for easier installation of the slider mounting screws (#4). Step 5 Slide trash can wire rack assembly out of cabinet and insert side wire (#3) into tubes of trash can wire rack and install plastic trash can (#6). P.