User`s guide

2-5
Installing the Driver
4 When the array is finished building, or if you are continuing
from Step 3, insert the SuSE CD Disk 1 in the CD-ROM drive
and restart the system.
5 When the SuSE Installation menu appears, press the Alt key,
then select one option from the Menu and press Enter.
6 When prompted, insert the driver disk you created (see Step 1)
and press any key to continue.
7 Follow the prompts to set up your preferred environment.
8 Continue with the Linux installation according to the SuSE
documentation.
9 When the SuSE Menu appears:
■ For SuSE 8.0—type acpi=off at the boot options, then
press Enter.
■ For SuSE 8.1—type noapic at the boot options, then press
Enter.
10 When the Linux installation is complete:
■ For SuSE 8.0—edit the /etc/lilo.conf file by removing:
append=”acpismp=force”
Run the /sbin/lilo command to update the LILO.
■ For SuSE 8.1—go to the scrip file by typing:
edit/boot/grub/menu.lst
Type noapic after vga=xxx as in this example:
Kernel(hd0,0)/vmlinux root=/dev/hdc3
vga=791 noapic