User Manual

10
SCSI Card 2906 User’s Reference
In Windows NT 4.0, where can I check which resources are available on
my computer?
Note:
You must log in as an Administrator to complete the
following steps.
1
Click the
Start
button, point to
Programs
, point to
Administra-
tive Tools
, select
Windows NT Diagnostics
and then click
Resources Tab.
2
Select the resource from the Used Resources list, for example
IRQ, DMA, etc.
3
In the SCSI Adapters window, click the
Properties
button to
find which resources are in use.
What if there is no SCSI Controller icon under Device Manager, or the
software driver for the SCSI Card 2906 does not appear under Device
Manager?
Generally, when the SCSI Card 2906 software driver is not listed in
the Device Manager, the system BIOS is not giving the SCSI Card
2906 any resources. Check for available resources (see the previous
question). If resources are available, install the SCSI Card 2906 in
another PCI slot.
Note:
The SCSI Card 2906 software driver may also be listed
as
“PCI SCSI Bus Controller”
under the Other Devices icon
in Device Manager. If it is listed there, reinstall the driver as
explained on the next page.
If the SCSI Controllers icon or the software driver do not appear:
1
Double-click the
Add New Hardware
icon in Control Panel.
2
Select
Yes
on the second screen of the Add New Hardware
Wizard to have Windows search for the SCSI Card 2906.
3
Follow the onscreen instructions.
If Windows 95/98 does not detect the SCSI card, run the Add New
Hardware wizard again:
1
In the Control Panel, double-click the
Add New Hardware
icon.