User Manual

11
SCSI Card 2906 User’s Reference
2
In the second screen of the wizard, click
No.
3
Select
SCSI controllers
on the next screen.
4
Select the model of your Adaptec SCSI Card.
If SCSI Card 2906 is not on the list, you may be able to install a SCSI
card driver from the Windows 95/98 CD-ROM (or from the Adaptec
EZ-SCSI Setup Diskette). Follow these steps:
1
Place the Windows 95/98 CD-ROM in your CD-ROM drive (or
insert the Adaptec EZ-SCSI Setup Diskette in the floppy disk
drive) and run the Add New Hardware wizard.
2
Select
No
on the second screen of the wizard.
3
Select
SCSI controllers
on the next screen.
4
Click the
Have Disk
button, then click the
Browse
button.
5
Look in the
\drivers\storage
directory of the CD-ROM and
select the model of your SCSI card or go to
a:\win95\98
on the
Adaptec EZ-SCSI Setup Diskette.
How can I check the status of a resource (for example, IRQ,
Memory, I/O)?
1
Click the
Start
button, point to
Settings
, then click
Control
Panel
.
2
Double-click the
System
icon.
3
Click the
Device Manager
tab.
4
Click
Computer
, and then click
Properties
.
5
Open the
View Resources
tab, click the option button for the
type of resource you want to check.
6
The setting and the hardware using the setting displays.
■
If a specific resource is not listed, the resource is not used
by a device.
■
If a resource is listed more than once, the resource is used
by more than one device.
■
If a resource is used by an unknown device, the resource is
used but the device using the resource cannot be detected.