User Manual

11
Troubleshooting
“Attention! Insufficient termination detected on the SE connectors”
2
The SCSI card BIOS has detected that either
only one
or
no
devices
have been terminated on the narrow SE SCSI segment. Verify the ter-
mination on the devices connected to the internal and external
50-pin connectors. Terminate the SCSI devices at the ends of the
cable and leave the other devices unterminated.
2
The termination detection feature is only implemented on the 50-pin inter-
nal Fast/Ultra-SE connectors. The 68-pin LVD/SE connector does not sup-
port this feature.