User Manual

15
Using the Adaptec SCSI Card 29160N and SCSI Devices
Connecting the LED Connector
(
Optional feature
) Most computers have an LED disk activity light on
the front panel of the system case. If you choose to disconnect the
cable from the LED connector on the motherboard and connect it to
the LED connector on the SCSI card as shown in the diagram below,
the LED on the front panel of the computer will light whenever
there is activity on the SCSI bus.
Note:
If you are using non-SCSI disk drives, you may prefer
not to connect your computer’s LED to the SCSI card, since
the LED will then no longer indicate disk activity on the
other disk drives.
LED Connector
on host adapter
1
LED Cable
from
motherboard
Pin 1
1
2-pin
LED
Cable