Installation guide

25
Connecting SCSI Devices
Connecting SCSI Devices
Here are some examples of how you can connect internal and
external SCSI devices to the Adaptec SCSI Card 19160.
To achieve maximum performance, attach the first device to the end
connector (furthest from the SCSI card); attach other devices to the
connectors that are closer to the SCSI card.
The following example shows SCSI devices connected to all four
connectors.
The following example shows an Ultra160/Ultra2 SCSI device
connected to the 68-pin LVD/SE internal connector and Fast/Ultra
Narrow devices connected to a 50-pin external SE connector.
T
T
T
Ultra160/Ultra2 SCSI devices
Terminated
device
device
Te r m i n a t e d
SCSI devices
Fast/Ultra Narrow
Built-in
terminator
T
T
Built-in
terminator
Ultra160/Ultra2
SCSI device
Terminated
device