User`s guide

3-10
Adaptec Storage Management Software User’s Guide
Logical Device Addresses
Every device and array is assigned a logical device address by
Storage Manager. This is the address used by the host operating
system to access the device or array. Logical device addresses
appear in parentheses under the logical device and LSU icons on
the Logical Configuration View window.
Figure 3-4 shows typical LSU numbering, array numbering, and
drive numbers.
Figure 3-4 Logical Device Addressing
Combined RAID SW-UG.book Page 10 Monday, September 9, 2002 1:25 PM