User`s guide

3-14
Adaptec Storage Management Software User’s Guide
Note: The availability of the various buttons depends on the
current configuration and state of the array.
The toolbar at the bottom of the Array Group Information window
contains the following buttons:
Creating an Array Group
To create an array group, follow these steps:
Event Log Displays the activity log of the RAID system. For
more information, see page 3-32.
I/O Stats Displays the log of the array’s I/O activity. For more
information, see page 3-45.
Verify Starts the process of checking the current status and
operability of the RAID array. For more information,
see page 3-43.
Expand Windows XP, Windows 2000 and Windows NT only—
Allows setting and checking the parameters of the
RAID controller. For more information, see page
3-19.
Name Allows entering or changing the name to be shown
for this RAID array. This does not affect the LSU of
the array. For more information, see page 3-21.
Configure Allows changing the configuration of the array.
Print Prints the configuration file of the selected RAID
array.
Build Arrays that have a build pending display this
button.
Rebuild Redundant arrays that have a failed drive show this
button.
Stop Bld Arrays that are building or rebuilding show a Stop
Bld button.
Stop Vfy Arrays running a Verify operation show this button.
Combined RAID SW-UG.book Page 14 Monday, September 9, 2002 1:25 PM