Technical data

Table of Contents
5.10.7 Interrupting the running process 33
5.11 Termination of the deletion process 33
5.11.1 User abort 33
5.11.2 Regular termination 33
5.11.3 Final report 33
5.11.4 Deletion report 34
5.12 Ending the program 36
5.12.1 End dialog 36
5.12.2 Good-bye screen 36
6 Operating principles.......................................................................................................................................37
6.1 Deletion area 37
6.1.1 Preliminary remark 37
6.1.2 Physical deletion 37
6.1.3 Deleting an entire drive 38
6.1.4 Deleting a single partition 38
6.1.5 Deleting a sector area 38
6.2 Automatic troubleshooting 39
6.2.1 Intensive reading/writing 39
6.2.2 Read errors 39
6.2.3 Write errors 39
6.2.4 Verification errors 39
6.3 Deleting a sector area 40
6.3.1 Usage 40
6.3.2 Functioning 40
6.4 Mass deletion (MultiDelete mode) 40
6.4.1 Mode of operation 41
6.4.2 Speed 41
6.4.3 Different media 41
6.5 Deletion methods 41
6.5.1 Automatic 41
6.5.2 Standards 42
6.5.3 Custom 43
7 Troubleshooting...............................................................................................................................................44
7.1 Load errors 44
7.1.1 Error #5002 and ‘Disk error’ 44
7.1.2 Other errors 44
7.2 Keyboard and mouse 44
7.3 General problems 45
7.3.1 Slowed down system 45
7.3.2 Read, write and verification errors 45
7.4 IDE/ATA/SATA 45
7.4.1 Drive not recognized 45
7.4.2 IDE controller not found 45
iv