User`s guide

Adaptec SAS RAID Conﬁ guration and the Windows OS Installation Instructions

4. Use the arrow keys to select an item. Then, press <Enter> and the arrow keys to

conﬁ gure the setting for the item selected.

5. To load the default settings, press <F6>.

Note: The default setting for each item is listed below:

Runtime BIOS: Enabled,

BBS Support: Device,

POST Banner Display: Enabled,

CTRL-A Message Display: Enabled,

Physical Drives Display during POST: Enabled,)

6. Press <Esc> to return to the previous menu and to exit the utility.

To Set Controller Conﬁ guration:

3. Select "Controller Conﬁ guration" and press <Enter> to access the submenu as

shown below: