User`s guide

Chapter 7: Installing the Driver and an Operating System ● 54
7 Complete the Linux installation, following the instructions included
with your operating system.
8 Continue with Managing Your Storage Space on page 60.
Installing with NetWare
Note: You will need your NetWare installation CD to complete this
task.
To install the driver when installing NetWare:
1 Restart your computer, then install NetWare. (For instructions, refer
to your NetWare documentation.)
To be able to load additional drivers later, select Manual install mode
during the first part of the installation.
To load additional drivers:
a Select Modify when the storage adapters are displayed.
b Select Storage adapters and press the Insert key to add an
unlisted driver from the floppy disk.
2 When the Device Types screen appears, check the Storage adapters
list and select Modify to add another driver.
3 Select Storage adapters, then press Enter.
All recognized controllers are displayed.
4 If AACRAID is detected, delete it.
5 Press Insert to add another driver.
The available drivers are displayed.
6 Insert the driver floppy disk.
7 Press the Insert key to scan the floppy disk drive.
Once the driver is selected, the Parameter screen is displayed.