User`s guide

Chapter 8: Installing the Driver on an Existing Operating System ● 59
Installing on NetWare
Note: Before you begin, ensure that your NetWare OS has been
upgraded to the minimum patch level specified by Novell. Refer to the
Novell Web site for more information.
To install the driver on NetWare:
1 Start your computer.
2 At the NetWare server console prompt, type load hdetect , then press
Enter.
3 At the Device types menu, select Continue , then press Enter.
4 At the Device type option, select Modify , then press Enter.
5 Select Storage Adapters , then press Enter.
6 At the Additional Driver Options menu, select Modify , then press
Enter.
7 At the Driver Name menu, press the Insert key.
8 Insert the driver disk, press the Insert key, then press F3.
9 At the A:\ prompt, press Enter.
The driver installs.
10 At the Additional Driver Option menu, select Return to driver
summary
, then press Enter.
11 At the Driver type menu, select Load on Additional Driver Options.
12 After the driver loads, select Continue.
13 Continue with Managing Your Storage Space on page 60.