Specifications

8
Adaptec Fibre Card 9110G User’s Reference
Connecting Cables
1 Select the correct cable that matches the GBIC you installed.
2 Install the end connectors into the GBIC. The GBIC and Fibre
Channel cable are keyed, so they can only fit one way. See
Figure 4 on page 9.
Caution: For optical Fibre Channel cables, support the cable
so that you do not have a bend radius of less than three
inches.
Caution: For optical and copper Fibre Channel cables,
support and route the cable to prevent damage from sharp
edges or from being crushed by nearby equipment.
!
!
Optical (SC)
Copper (HSSDC)