Specifications

12
Adaptec Fibre Card 9110G User’s Reference
Installing the Device Driver
for Windows NT 4.0
Before installing the Adaptec Fibre Card 9110G driver, Windows NT
4 should be installed.
Note: You cannot install the operating system to a drive
attached to the Adaptec Fibre Card 9110G.
Installing the Driver
To install the Windows NT driver, perform these steps:
1 Start Windows NT and log into an account with administrative
privileges.
2 Insert the Adaptec Fibre Channel Drivers disk into the floppy
drive.
3 From the Start button, select Settings.
4 From the Settings menu, select Control Panel.
5 From the Control Panel window, select SCSI Adapters icon.
6 From the SCSI Adapters window, select Drivers tab.
7 From the Drivers window, select Add.
8 Select Have Disk.
9 Click the Browse button.
10 Double-click the Winnt4 folder.
11 Click the Open button.
12 Click OK.
13 Select Adaptec AFC-9110G PCI 64-bit/66MHz Fibre Channel
1Gbit Controller.
14 Click OK.